In 1970, Statek Corporation was the first to use semiconductor technology such as photolithography, chemical etching and micromachining to manufacture quartz resonators in wafer form. Today, Statek remains at the forefront of innovation in the design, development and manufacturing of highly reliable, ultra-miniature quartz-based frequency control products.
1970年,Statek公司率先使用光刻、化学蚀刻和微机械加工等半导体技术制造晶片形式的石英谐振器。今天,Statek在高可靠性、超小型石英晶振频率控制产品的设计、开发和制造方面仍然处于创新的前沿。
Innovative in-house design, production and testing capabilities make possible not only rapid new product development and validation, but also continuous improvement of key product features such as low acceleration sensitivity, high shock, tight calibration tolerance, low aging, radiation resistance, and highly stable frequencies at increasingly higher operating temperatures.
创新的内部设计、生产和测试能力不仅使新产品的快速开发和验证成为可能,而且使关键产品特性的持续改进成为可能,例如低加速度灵敏度、高冲击、严格的校准容差、低老化、抗辐射以及在越来越高的工作温度下的高度稳定的频率。
Statek Crystal INTRODUCING THE SMALLEST, HIGHEST SHOCK RATED, U.S. MADE, LOW EARTH ORBIT OSCILLATOR
Statek晶振推出最小、最高的冲击等级, 美国制造的低地球轨道振荡器
Statek Corporation is proud to announce the release of
its 30 kRad tolerant, ultra-high shock, low phase-noise oscillator. Capable of withstanding
shocks up to 100,000 g, the CXOXLPNR is housed in a hermetically sealed ceramic 3.2 x
2.5 mm package and has an operating temperature range of -55 °C to +125 °C. The
CXOXLPNR delivers a low voltage CMOS output with low phase noise, low jitter and low
acceleration sensitivity. At 125 MHz, its noise floor is -165 dBc/Hz at 20 MHz offset and the
typical RMS phase jitter over 12 kHz to 20 MHz is 75 fs. Available with screening options
to meet all program requirements, the CXOXLPNR will become the preferred choice for all
Low Earth Orbit (LEO) applications.
Statek Corporation自豪地宣布发布 其30kRad耐受、超高冲击、低相位噪声石英晶体振荡器。能够承受 冲击高达100,000 g,CXOXLPNR封装在一个密封的陶瓷3.2x 2.5mm封装,工作温度范围为-55°C至+125°C CXOXLPNR提供低相位噪声、低抖动和低功耗的低压CMOS输出 加速度灵敏度。在125MHz时,其噪底为-165 dBc/Hz(20 MHz偏移),而 12 kHz至20 MHz范围内的典型均方根相位抖动为75 fs。有筛选选项 为了满足所有的计划要求,CXOXLPNR贴片晶振将成为所有人的首选 低地球轨道应用。
Located in Orange, California, Statek Corporation is the leading U.S. designer and manufacturer of high reliability crystals and oscillators. Statek’s core competency is its ability to
design and manufacture ultra-miniature resonators in quartz wafers using its patented
photolithographic and chemical milling processes. Founded in 1970, Statek has become
the premier supplier of high shock and high vibration crystals and oscillators for all industries requiring high reliability and extremely robust performance. With superior shock and
vibration, extended temperature ranges, small size and extreme high reliability, Statek is
the supplier of choice for the Industrial, Military, Medical, and Space industries.
Statek Corporation位于加利福尼亚州奥兰治,是美国领先的高可靠性晶体和振荡器设计和制造商。Statek晶振厂家的核心竞争力是它能够利用其专利技术设计和制造超小型石英晶片谐振器 光刻和化学研磨工艺。史泰克公司成立于1970年,现已成为高冲击和高振动晶体和振荡器的首要供应商,适用于所有要求高可靠性和极高性能的行业。具有超强的震撼力和振动、扩展的温度范围、小尺寸和极高的可靠性 工业、军事、医疗和航天工业的首选供应商。
表面安装振荡器